KH-DBS501 series submersible level transmitter is measured based on the principle of hydrostatic proportional to the height of the liquid, investment-type level transmitter with piezoresistive effect diffused silicon or ceramic sensing element, the static pressure switch into an electrical signal. After temperature compensation and linearity correction. Converted into 4-20mADC standard current signal output. Sensor portion KH-DBS501 series input type level transmitter can be put directly into the liquid, the transmitter portion of the available flange or bracket installation extremely easy to use. Features good stability, high accuracy, liquid level transmitter input directly into the measured medium, the installation is quite easy to use. Solid-state construction, no moving parts, high reliability, long life from the water, the viscosity of the oil to the paste can be carried out with high precision measurements, not measured media bubble, deposition, electrical characteristics of a wide range of temperature compensation. Input type level transmitter with power reverse polarity protection and overload current limit protection. Main Specifications Measuring range: 0.3 ~ 100m (optional by the user) Accuracy: 0.2,0.5,1.0 Operating Temperature: -20 ~ 80 ℃ Output signal: 4 ~ 20mADC wire Supply voltage: Standard 24VDC (12 ~ 36VDC) insensitive Area: ≤ ± 1.0% FS load capacity: 0-600Ω Relative humidity: ≤85% protection: IP68 Explosion-proof mark: ExiaⅡCT4-6 selection phenotype profile description KH -DBS50 submersible hydrostatic level transmitter class quality 1 cable type 2 rod (sensor mounted on the bottom, in direct contact with the liquid medium) 3 4 guide lever-type anti-corrosion formula (sensor mounted in the upper part, not in direct contact with media) are connected in the form of T rack mounting flange mounting DN40 PN1.0 Y N special agreement sensor rod connecting material 1304 2 316 3 316L 4 nitrile rubber and PVC composite cable type 5 polytetrafluoroethylene, (polypropylene flange) O no explosion-proof way E Intrinsically safe Exia ⅡCT6 display O without on-site instructions Z with ammeter indicator (scale 0-100%) X with LCD digital display cases counterweight counterweight W O without the need counterweight - □ mounting height (mm) - □ measuring height (mm) - □ test Medium Density (g / cm3)